Browse Site by Tags

Showing related tags and posts accross the entire site.
  • video conversion for broadcast, Mastering.

    I've inherited a project that was startd with no thought to delivery, and it will be delivered to a broadcaster. Firstly I am in a PAL region so 25fps is the norm and I am delivering an DNxHD, MXF OP1a, 1080i, 8bit, 25fps, with 8 embedded audio channels. This project has many different framerates...
    Posted to Avid Media Composer - Mac (Forum) by Zingara on Sat, May 9 2020
  • DNxHD 444 to DNxHD 36 (levels shift)

    Hi, I'd like to use DNxHD 444 codec for mastering. But I encounter a problem : When i proceed to a DNxHD 444 video mixdown on a DNxHD or 1p1 10bit sequence, the result is OK —> Studio swing to studio swing When i proceed to a DNxHD 36 video mixdown on a DNxHD 444 sequence, the result is...
    Posted to Avid Media Composer - PC (Forum) by FlorentinGc on Sun, Mar 1 2015
  • Mastering with a Teranex

    Hey Everyone, My facility recently aquired a Blackmagic Design Teranex 2D. We also have a Sony HDW-1800 tape deck. I am trying to use the teranex as a converter between the Dnx Nitris and the tape deck in order to convert a 23.98 timeline into 59.94 to be put to tape. so the configuration is Nitris to...
    Posted to Avid Media Composer - PC (Forum) by ryguy on Mon, Jun 9 2014
  • New Mac Pro - Mastering with Avid Nitris

    Hello Everyone - I was curious to know if any new Mac Pro users out there have discoverd an output solution via Avid's Nitirs DX. As I undertand it from past forum discussions, Avid has qualified the Mojo DX with a Thunderbolt adapter, but claims Nitris DX is not supported. Other past posts have...
    Posted to Avid Options Forum (Forum) by BrettG on Tue, Apr 15 2014
  • Creating a master for two 709 and RGB colour space

    Hi everyone, I'm mastering a documentary today and want to output two versions, one with RGB colour space for playback on computer and on with 709 colour space to burn DVDs with My Project is set up with the colour range between 16-235. So what I want to do is clip anything out side of that for both...
    Posted to Avid Media Composer - Mac (Forum) by Editosaurus on Mon, Aug 20 2012
  • Mastering Issue out of Avid

    Hi Everyone, I am mastering a TV show for broadcast. I am using Avid MC 5.5.2 on a HP Z800 with a Avid Nitrus. I am mastering to HDCam tape using a HDW-1800. My original Content was shot in 23.98 FPS and then for output to tape I am opening up the 23.98 timeline in a 29.97 project and the avid converts...
    Posted to Avid Media Composer - PC (Forum) by ryguy on Tue, Nov 15 2011
  • Re: Proper Audio Level

    I just set my import level -10. Makes sense since I would often turn down my music on the first layout/mix to compliment with other elements. my recent projects were interview/testimonials/promos. we normally finish video&audio inside Avid. Although once in a while, would tap in soundbooth or Adobe...
    Posted to Avid Media Composer - Mac (Forum) by Ervz Tia (Tikboy) on Fri, Sep 30 2011
  • HDV Tape Mastering Process

    Hello, What would be your suggested best practice for recording finished projects back to tape for master? Say, several 5-min projects in one 60m miniDV master tape. How would you apply leaders/bars,etc...? Anyone?
    Posted to Avid Media Composer - Mac (Forum) by Ervz Tia (Tikboy) on Thu, Sep 15 2011
  • Re: TMPGEnc issue

    Hi Nick, I have been on a rough road with this issue for the past few months. I have been in contact with the Pegasys support who have found that there is an incompatibility with XD decode and TMPGEnc VMW5 Quicktime 7 reader but have not given me any concrete plan of action on a fix. If you can beg/borrow...
    Posted to Avid Media Composer - PC (Forum) by kckleong on Thu, Sep 15 2011
  • 3D Stereoscopic conform on DS 10.5

    Hi, Can someone clarify if DS 10.5 can do a full Hi-Res 3D Stereoscopic conform? The help file only mentions that it can edit 3D material created in Metafuze (half resolution). Can we edit in Media Composer the 3D transcoded material in Metafuze and then use DS to conform the 3D material not from the...
    Posted to Avid DS (Forum) by beactive on Tue, Dec 21 2010
Page 1 of 1 (10 items)

© Copyright 2011 Avid Technology, Inc.  Terms of Use |  Privacy Policy |  Site Map |  Find a Reseller