Latest post Mon, Jan 27 2020 9:54 AM by Thomas Erichsen. 15 replies.
Page 1 of 2 (16 items) 1 2 Next >
Sort Posts: Previous Next

  • Mon, Oct 17 2005 2:53 AM

    • ccoote
    • Not Ranked
    • Joined on Thu, Oct 13 2005
    • Posts 44
    • Points 550

    Match frame for precomputes

    Reply Contact

    I would like to be able to match back to precomputes just like you can with master clips. Sometimes you have a graphic in the timeline and want to find the bin it came from but when you hit match frame-no go.

    [view my complete system specs]

  • Mon, Oct 17 2005 4:04 AM In reply to

    • xyedit
    • Top 50 Contributor
    • Joined on Thu, Oct 13 2005
    • Boston, MA
    • Posts 2,119
    • Points 26,995

    Re: Match frame for precomputes

    Reply Contact
    You can already do this... you just need to know how. 

    The Search function works pretty darn well... I typed "match frame, console" and BLAMMO Surprise [:O]

    Also, "match frame, precompute" works...(since I figured that you wouldn't have known about the console command to use "console" as a keyword)


    Dell PWS360 P4 2.4GHz 1.5GB RAM 80GB system drive 500GB internal SATA2 media drive >1TB... [view my complete system specs]
    Kenton VanNatten (will edit for money)

  • Mon, Oct 17 2005 11:42 PM In reply to

    • No. 6
    • Not Ranked
    • Joined on Thu, Oct 13 2005
    • The Village
    • Posts 49
    • Points 735

    Re: Match frame for precomputes

    Reply Contact
    Yes but you shouldnt need  a console command to do this. The same issue occurs when you reconform a sequence with motion effects. If I can find the Bin, Find the source clip and then manually match frame, why cant a computer program do it?

    Also If you colour effect a rendered effect you need to re-render the effect. Why can an AVID not colour grade the already rendered pre-compute!!

    I have a 1000 more, if you want them.. . . .

    e.g.

    Why do motion effects on AVID still have the same bouncy top line they had in 1995 ? ? ? causing me to blow up all my motion effects by 102%. what a waste of time

    TBD



    ZX Spectrum 16K with MicroDrives and Cheetah speech Synthesiser, running Xpress Pro 6 [view my complete system specs]
    Who is no. 1?

  • Wed, Oct 19 2005 12:39 PM In reply to

    • Sasquatch
    • Top 200 Contributor
    • Joined on Thu, Oct 13 2005
    • Nottingham England
    • Posts 607
    • Points 7,220

    Re: Match frame for precomputes

    Reply Contact

    Why do motion effects on AVID still have the same bouncy top line they had in 1995 ? ? ? causing me to blow up all my motion effects by 102%. what a waste of time

     

    That is a real pain, especially if you want to apply a glow, massive flicker over the whole screen, better to crop though or you soften the image.

    HP Z420 16gb FX 1500 MC 8.4.0 Blackmagic deckink 4k extreme HP Z400 24gb FX3800 MC8.4.0 Aja express HP Z400 16gb FX3800 MC8.4.0 Blackmagic deckink 4k... [view my complete system specs]

    Mike Kruft. Nottingham, UK

  • Fri, Oct 21 2005 12:25 PM In reply to

    • sep
    • Top 25 Contributor
    • Joined on Thu, Oct 13 2005
    • France
    • Posts 5,593
    • Points 62,620

    Re: Match frame for precomputes

    Reply Contact

    Type in console :

    "subsys monpane debug"

    This allows loading of precomputes into source monitor,  

    Adrenaline MCA 2.8 XW8400 3Gb RAM DNxcel Board, 760 Gb striped SCSI media storage, 1.2 TB 4 X striped SAS 15 000rpm storage.----MC Soft 2.8 + Mojo HP XW8000... [view my complete system specs]

    sep

     

    "out of difficulty comes performance"

    ______________________________

     

     Web site : www.audiacom.com

  • Fri, Oct 21 2005 1:45 PM In reply to

    • thb
    • Not Ranked
    • Joined on Thu, Oct 13 2005
    • Germany
    • Posts 68
    • Points 855

    Re: Match frame for precomputes

    Reply Contact
    but this function only loads the fill layer of titles or matte-keys... not very functional 
    [view my complete system specs]

  • Fri, Oct 21 2005 1:51 PM In reply to

    • sep
    • Top 25 Contributor
    • Joined on Thu, Oct 13 2005
    • France
    • Posts 5,593
    • Points 62,620

    Re: Match frame for precomputes

    Reply Contact

     thb wrote:
    but this function only loads the fill layer of titles or matte-keys... not very functional 

    OK,, I agree 

    Why not select the clip you want to get in source monitor in the timeline, (in an out point if you want pressing T) Ctrl + Alt + C !and here it is !!!

    Adrenaline MCA 2.8 XW8400 3Gb RAM DNxcel Board, 760 Gb striped SCSI media storage, 1.2 TB 4 X striped SAS 15 000rpm storage.----MC Soft 2.8 + Mojo HP XW8000... [view my complete system specs]

    sep

     

    "out of difficulty comes performance"

    ______________________________

     

     Web site : www.audiacom.com

  • Fri, Oct 21 2005 3:22 PM In reply to

    Re: Match frame for precomputes

    Reply Contact
    Way to go, Sep!  That not only loads the full effect clip into the source monitor, it does it without having to use the console command.  THANK YOU!!!
    Newscutter Nitris DX 9.5.3.5 * Media Composer 5.5.3.6 (At Home on PC running XP Pro) * Symphony 6.5.2.1 (At home on MacBook Pro3,1 running 10.7.2) * Interplay... [view my complete system specs]

    Larry Rubin

    Senior Editor

    The Pentagon Channel

    www.pentagonchannel.mil

  • Fri, Oct 21 2005 4:02 PM In reply to

    • thb
    • Not Ranked
    • Joined on Thu, Oct 13 2005
    • Germany
    • Posts 68
    • Points 855

    Re: Match frame for precomputes

    Reply Contact
    but with this operation you´ll only get the clipboard content and not the source clip!
    [view my complete system specs]

  • Fri, Oct 21 2005 4:46 PM In reply to

    Re: Match frame for precomputes

    Reply Contact

    thb:

    While the name ID above the source monitor identifies it as a sub-sequence with your current sequences' name, if you follow Sep's instructions, it does in fact match back to your pre-compute clip as one complete entity and loads it into the source monitor.  When you then edit that clip into your sequence, you will see your original pre-compute nomenclature in the timeline.

    Newscutter Nitris DX 9.5.3.5 * Media Composer 5.5.3.6 (At Home on PC running XP Pro) * Symphony 6.5.2.1 (At home on MacBook Pro3,1 running 10.7.2) * Interplay... [view my complete system specs]

    Larry Rubin

    Senior Editor

    The Pentagon Channel

    www.pentagonchannel.mil

  • Fri, Oct 21 2005 5:50 PM In reply to

    • Shayder
    • Not Ranked
    • Joined on Thu, Oct 13 2005
    • Saskatchewan, Canada
    • Posts 39
    • Points 500

    Re: Match frame for precomputes

    Reply Contact
    Now once it's loaded into the monitor is there any way to get it to matchback to a bin?
    MC Adrenaline HD 2.1.6 Windows XP SP2 3 Gigs Ram HP Workstation XW8200 Xeon 2.80 [view my complete system specs]

  • Fri, Oct 21 2005 6:11 PM In reply to

    Re: Match frame for precomputes

    Reply Contact

    Shayder:

    Not that I can figure out.  The "find bin" command doesn't seem to do anything.

    Newscutter Nitris DX 9.5.3.5 * Media Composer 5.5.3.6 (At Home on PC running XP Pro) * Symphony 6.5.2.1 (At home on MacBook Pro3,1 running 10.7.2) * Interplay... [view my complete system specs]

    Larry Rubin

    Senior Editor

    The Pentagon Channel

    www.pentagonchannel.mil

  • Wed, Nov 9 2005 8:23 PM In reply to

    • chillyche
    • Not Ranked
    • Joined on Thu, Oct 13 2005
    • Brooklyn, NY
    • Posts 158
    • Points 1,855

    Re: Match frame for precomputes

    Reply Contact
    EXACTLY. Somebody hands me a sequence with offline precomputes or imported clips with alpha channels, and I wanna find the bin these babies are in to batch import, I want to match back a precompute from a sequence to a bin (with a clip I match it into the player window, then I match that into the bin).

    Why can't I do this? Just fix it, please.
    Win7 x64 Intel Core i7-3770K @3.5 GHz 32 GB RAM MC 7.0 [view my complete system specs]

  • Wed, Nov 9 2005 8:46 PM In reply to

    • xyedit
    • Top 50 Contributor
    • Joined on Thu, Oct 13 2005
    • Boston, MA
    • Posts 2,119
    • Points 26,995

    Re: Match frame for precomputes

    Reply Contact
     chillyche wrote:
    EXACTLY. Somebody hands me a sequence with offline precomputes or imported clips with alpha channels, and I wanna find the bin these babies are in to batch import, I want to match back a precompute from a sequence to a bin (with a clip I match it into the player window, then I match that into the bin). Why can't I do this? Just fix it, please.


    You can highlight the sequence in the bin and do Batch Import from there. 
    Dell PWS360 P4 2.4GHz 1.5GB RAM 80GB system drive 500GB internal SATA2 media drive >1TB... [view my complete system specs]
    Kenton VanNatten (will edit for money)

  • Wed, Oct 21 2015 9:43 AM In reply to

    • pierreh
    • Top 75 Contributor
    • Joined on Thu, Oct 13 2005
    • Paris, London
    • Posts 1,278
    • Points 15,490

    Re: Match frame for precomputes

    Reply Contact

    I'm adding my voice to that thread... 10 years later!

    I'm working on a project with many Photoshop files imported with their alpha channel. So in the Timeline, they show a little key icon and if I try to match frame one, I get the infamous message "Precomputes can't be loaded in monitors". Which is frustrating as they do open from the bin...

    What I need is not only to be able to match frame - otherwise I would just copy them as suggested in that thread. I match frame in order to Find Bin... So I have access to the alternatives to the one that's in the Timeline.

    Can we get that one day? Please?

    - Work: MacPro 2010 3.46Ghz 12 Cores 48Gig RAM, Mojo DX, 10.14.6 - Home: MacBookPro 2.5Ghz quad-i7, 16Gig Mem and SSD OSX 10.11.6 [view my complete system specs]
Page 1 of 2 (16 items) 1 2 Next >

© Copyright 2011 Avid Technology, Inc.  Terms of Use |  Privacy Policy |  Site Map |  Find a Reseller