Showing related tags and posts accross the entire site.
-
I have some footage from a Sony DSR-500ws, shot in "Wide Screen" mode. It seems to be NTSC 4:3 with something similar to 16:9 squeezed like an anamorphic film. There is a "wide screen" ingest setting that resolves it into an HD-like aspect ratio. What, actually, have I got with this...
-
i chane the computer at my edit system(adrenaline+mc 2.1.6 version) from hp xw 8200 to 8400 dual quad, and since then i canot here sound while capturing.i see the levels at the audio tool, but i canot here it in the speakers. after i finish to capture, the sound in the system are fine. i try to swith...
-
Bump! I've been running into similar problems, though our sequences usually peak between -8db and -4db. We export same-as-source compression quicktime files to a network drive and those files are mastered to dvd using Nero Vision or DVD Studio Pro. In either case, the audio levels on the resulting...
-
Has anyone out there already made some experience with XDCAM HD 422 (50MBit/sec) and the new MC 3.0? Somewhere I read, that MC 3.0 should support XDCAM - but there were no details about the resolutions, bitrates and so on. Also there seems to be no official statment from Avid, until they have done their...
-
I am making feature films for theatres. Most of the projects are in 1080p 25 format. Sometimes people prefer to shoot in 1080p 24 . When I need to record my 24p hd project via my DVD recorder , I can NOT get a 25i PAL signal through the composite output on my Adrenaline box (which is quite normal). Anyone...
-
I am shooting standard def native 16:9, exporting a quick time ref. file from the Adrenaline to Sorenson Squeeze to transcode to an MPEG file for DVD playback with 16:9 pixel aspect ratio with "letter box or pillar" checked on the Large File DVD setting. It plays perfectly fine on a 4:3 standard...
-
I have a question about outputting a 1080i Tiff Sequence that was imported MXF 1:1 on a Unity 5.0 through a MC Adrenaline. Anytime we play the sequence down it lags on the Adrenaline. If we open the project up on our SN it seems the added hardware resolves the lag and it outputs to the monitor without...
-
I created a new project and began capturing tapes. All the clips had a severe repeating audio-buzz in one channel. After hours of searching I probably found the solution. The default setting of the HW calibration (settings - audio projects - hardware) was set to -20 dB, but should be (in my case): -14...
-
I have done research on the boards here and see that the Adrenaline box does not support capturing HDV through it's onboard 1394 port and that you have to use a dedicated port on the computer instead but that it might be supported in the future. The thread I found that stated that was from around...
-
Hello, here's my problem, We're capturing into a MCAdrenaline (2.1.6) from a DCVProHD deck's SD downconvert for the offiline cut. We're taking SD SDI video with 4 channels of embedded audio. The audio project is 48k. The deck is a Panasonic AJ-HD-1400. Sometimes the capture has really...
Page 1 of 1 (10 items)