I have a FX DEKO II with the option CLIP DEKO and i see in the help file that the unit need to get synchronize and that ther is a a procedure that most be taken to apply the sync but in the option that the help indicates to do it I can't find it in my deko can you help me.

What the unit is doing is that upon loding a clip in the deko you can do anything with it in the deko and even save changes in the deko but as soon as you asign the output the video out look green like it was missing the sync.

 Hi there,

Yes -- your Deko system must be connected to a sync generator for timing with other devices. You may want to contact someone on your technical team to obtain the proper sync in order for your program output to display properly.

And, here is a link to the FXDeko II Installation Guide for further assistance.

http://www.avid.com/cgi/kbase-redir.aspx?p_faqid=72628&p_created=1147699033&p_sid=-yoZZ*cj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PWRmbHQ6MSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODEsODEmcF9wcm9kcz0wJnBfY2F0cz0wJnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1EZWtvIEluc3RhbGxhdGlvbiBHdWlkZQ**&p_li=&p_topview=1

If you encounter difficulty, you may reach the Avid Broadcast Support Dept:

For Avid On-Air Graphics (Deko, Thunder, DekoCast) technical or operational support, please contact Avid Broadcast Support:
Tele:   (866) 472-2736

Press 1, then 5, then 1

Thanks and good luck,
Teicia