Deko Family and On-Air Graphics

Re: DekoCast 4.1x group composite style issue

alaa329 — Sat, 04 Jul 2009 20:16:44 GMT

Actually this error appears many time when running the dekocast app in the past few months and in that time i made retore to the dekocast system and it works prop .

but now when i made restore the dekocast apllication never run and all the time its giving the same error msg..

So i dont know if the corsica board is working any more

Re: DekoCast 4.1x group composite style issue

DekoCast Dave — Mon, 29 Jun 2009 16:55:35 GMT

It looks like you are in Qatar, so you should please contact your local support. This error indicates that the software is not detecting the I/O card (Corsica). Has anything changed recently or did this just suddenly happen?

As a point of reference, when all OAG units are shipped, we include the Acronis program which can be used to back up and/or restore your system partition. We recommend that when after you install your system and everything is working to your satisfaction, please make a backup of the system partition at that time. Then if a problem occurs at a later date, you can always restore to this known good state.

If you did not make a backup, we also ship an image of the system in teh E:\System_restore folder. You can use Acronis to create a bootable media disk. And then before restoring that original backup, I always recommend making a backup of the current system - just so that you can at least restore to the current state.

Once you have created a bootable rescue disk, boot off that. Then navigate to the E:\System_restore folder and restore either your backup or the default image.tib. The default does NOT have any software loaded. So aftter rebooting, you will need to go through the entire new system installation process. I recommend NOT activating Windows until after you are sure the restore will actually "fix" youyr system.

Re: DekoCast 4.1x group composite style issue

Teicia — Mon, 29 Jun 2009 16:30:53 GMT

Hi,

To help resolve your issue, please contact Broadcast Support...

Avid Broadcast Support:
Tele: (800) 639-7364 or (978) 275-2484

Press 1, then 5, then 1 for Deko
Press 1, then 5, then 3 for DekoCast
Press 1, then 5, then 4 for Thunder

Thanks and good luck.

Re: DekoCast 4.1x group composite style issue

alaa329 — Sat, 27 Jun 2009 18:21:13 GMT

HI I AM WORKING ON ALDAWRII AND ALKASS SPORT CHANNEL - DOHA - QATAR

I HAVE AVID DEKO CAST

deko cast info:

SN: 0020-03981-01 B
ABACT639272

DONGLE: 623037391

BUT IM FACING A TROUBLE ITS WHEN STARTING THE DEKOCAST APPLICATION IT GAVE ME THIS ERROR

Can't start Inflexion Engine : No hardware found . No canvases created

So please if sombody can help cause the dekocast is used for a critical issues in our tv station

Alaa Ghraizi
Graphic Coordinator
Al Dawri & Al Kass Sport TV Channel
Doha Mob:+9745036197

email : alaa329@hotmail.com

Re: DekoCast 4.1x group composite style issue

Teicia — Wed, 30 Jan 2008 19:57:13 GMT

Hi Sam,

I spoke with the SQA department and there could be an issue between Targa-based systems and Corsica-based. But this is the same system right, just different versions of software?

They asked me to have you phone into Broadcast Support to troubleshoot your finding. If it is a bug and can be fixed, they would like to log it into the system.

Please contact Broadcast Support at 1-800-639-7364, choose 1, then 5 for On-Air Graphics support.

Thanks,

Teicia

DekoCast 4.1x group composite style issue

Sam Eklund — Thu, 10 Jan 2008 14:16:34 GMT

Why is the ability to use a clip as a mask for grouped objects disabled in 4.1x versions of the DekoCast SW?

After a system crash on one of my DekoCasts with the 4.0x SW (where this functionality exists) I'm trying to recreate the scene on a 4.1.2 system with no luck. Using a still (Deko object) and moving it works in 4.1.2, however I need more accurate masking than that for this application.

Is it a bug or a feature, or maybe a Corsica Board issue?

The 4.0x system is a Corsica SD only, and the 4.1.2 system is an SD / HD Hybrid

We're working in SD PAL 16x9

Anyone run into this, any solutions?