Avid Media Composer - PC

Re: Rename of captured clips in media composer

mjolnarn — Tue, 25 Aug 2009 09:45:12 GMT

I just checked, it wasn´t possible to rename using MDV but you might find the tool useful anyhow.

Re: Rename of captured clips in media composer

mjolnarn — Tue, 25 Aug 2009 08:30:57 GMT

charan:

what's mdv

Google for mdv avid

Re: Rename of captured clips in media composer

charan — Tue, 25 Aug 2009 08:27:36 GMT

what's mdv

Re: Rename of captured clips in media composer

mjolnarn — Tue, 25 Aug 2009 08:21:07 GMT

I am just thinking loud and I am not at my system right now, but it might be possible to rename clips when you are using MDV, not at all sure however.

Re: Rename of captured clips in media composer

charan — Tue, 25 Aug 2009 08:13:33 GMT

when we rename the clip in the bin it is changed in bin and media tool only for the project we are working on but when we open the same clip in media tool in another project, it shows the name of the clip which was originally captured.

Re: Rename of captured clips in media composer

camoscato — Tue, 25 Aug 2009 07:52:22 GMT

Hi,

charan:
how can i rename the captured clips in MC so that the new name should display in every project in media tool??

i have caputured clip named jackson's birthday but it should be krimy's birhtday, how can we change the name in original clip so that we can get krimy's birhtday in every project in media tool.

Usually you just click on the name of a clip in the bin and type a new name. The new name should show up in the media tool. If that's not working, can you post a screen shot of where you're trying to change the clip name?

good luck,
Carl

Rename of captured clips in media composer

charan — Tue, 25 Aug 2009 05:26:39 GMT

how can i rename the captured clips in MC so that the new name should display in every project in media tool??

i have caputured clip named jackson's birthday but it should be krimy's birhtday, how can we change the name in original clip so that we can get krimy's birhtday in every project in media tool.

Re: related to Equivelent version of media composer

Job ter Burg — Mon, 24 Aug 2009 17:45:49 GMT

IIRC= If I Recall (or Remember) Correctly.

There used to be a list of supported decks on the Avid website, stating under which conditions they could be used (FireWire, RS422, Digital Cut, Insert Edit, etc), but the unusable Knowledge Base doesn't come up with a darn thing. Neither does Google.

*edit* through Google I found a list of Supported Devices and it does list the DSR1800 as supported for both IEE1394 and RS-422, but under Digital Cut it says "Fully Supported" for PAL and "Fully Supported with Inconsistent Results" for NTSC.

Just another thought: are both the deck and the Avid properly genlocked?

It also says it only supports 4ch audio at 32KHz, not 48K.

Re: related to Equivelent version of media composer

charan — Mon, 24 Aug 2009 17:28:51 GMT

i am using FireWire not RS-422

DSR1800, IIRC what does it mean

Re: related to Equivelent version of media composer

Job ter Burg — Mon, 24 Aug 2009 17:22:11 GMT

Are you doing a digital cut over FireWire or are you using RS-422? The latter is what is supported for the DSR1800, IIRC.

Re: related to Equivelent version of media composer

charan — Mon, 24 Aug 2009 16:59:32 GMT

when i insert edit a clip in mC 3.0.5 to a tape with DSR 1800p 4 ch deck, it does not record few frames of audio at the start(audio missing at start after insert edit).i have tried this with other deck modules in digital cut tool and different digital cut offset but i failed. then i tried this job with dsr 20p,30p,40p,45p and i succeed.

pls help me!

Re: related to Equivelent version of media composer

charan — Mon, 24 Aug 2009 16:12:24 GMT

how can i rename the captured clips in MC so that the new name should display in every project in media tool??

i have caputured clip named jackson's birthday but it should be krimy's birhtday, how can we change the name in original clip so that we can get krimy's birhtday in every project in media tool.

Re: related to Equivelent version of media composer

charan — Fri, 21 Aug 2009 14:40:47 GMT

thanks for ur suggessions. i will stick to my existing configuration.

how can i change the title of this post??

Re: related to Equivelent version of media composer

camoscato — Thu, 20 Aug 2009 20:44:21 GMT

Hi,

charan:
what does it mean?

It means those guys are playing with their systems to see if Windows 7 works or not. That's fine if you do not need your system to work all day every day because you rely on your system to make money.

If you need the system to run all the time, stick with the system requirements. Windows 7 is not listed on the system requirements.

good luck,
Carl

Re: related to Equivelent version of media composer

charan — Thu, 20 Aug 2009 20:17:05 GMT

camoscato:

curiosity:

Okay I bit the bullet and set up a system to try this out. Windows 7 (Beta7000) - 64bit Ultimate - formatted the hard drive and installed really quickly (much quicker than XP).

Avid MC 3.1.2 installed with only a couple of errors (I got a illegal function call error during the install - but I was unable to determine what is was in reference to.) I dismissed the errors and completed the installation.

MC loads fine - and basic functions (capturing video, playback to a deck/client display), basic edits, all work correctly.

i have read the article in Avid Media Composer - PC » MC on Windows 7

what does it mean?