Avid Media Composer - Mac

Re: Mojo DX deck control issue

FunkyDragon — Fri, 03 Jul 2009 16:31:42 GMT

http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=257457&Hilite=direct+on+no+port

http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=260091&Hilite=direct+on+no+port

Re: Mojo DX deck control issue

Kenton.VanNatten — Thu, 02 Jul 2009 23:38:41 GMT

raspago:

we have a cable here from the old system that is a rosetta stone model usb/4. it also says vtr 422 on it. it is usb on one end and serial on the other

.- That's all you need, The USB/4 has a built in RS-422 cable.

Download the Mac drivers from the addenda site, configure in Avid and you should be set.

I just picked up one of these cables today to connect to a DSR-45 - When I go into Deck config I select Direct, but my only option is "No Port"

I've installed the Mac drivers, what else am I missing?

Re: Mojo DX deck control issue

JonathanCrandall — Sat, 13 Jun 2009 02:34:40 GMT

Thanks for the quick response. How will it show up in AVID? Do i need to do anything in the MAC system prefs? And does anyone know if it works with Sony's DSR-1800A?

Re: Mojo DX deck control issue

raspago — Sat, 13 Jun 2009 02:29:12 GMT

we have a cable here from the old system that is a rosetta stone model usb/4. it also says vtr 422 on it. it is usb on one end and serial on the other

.- That's all you need, The USB/4 has a built in RS-422 cable.

Download the Mac drivers from the addenda site, configure in Avid and you should be set.

Re: Mojo DX deck control issue

JonathanCrandall — Sat, 13 Jun 2009 01:16:09 GMT

chrisfoley:

we have a cable here from the old system that is a rosetta stone model usb/4. it also says vtr 422 on it. it is usb on one end and serial on the other

i am guessing this is the adapter and cable rolled into one?

I've come across the same cable. Did you get it to work for you? If so, how? Thanks

Re: Mojo DX deck control issue

chrisfoley — Fri, 12 Jun 2009 21:31:08 GMT

i just found a keyspan adapter back here as well, so this should work...

i think this company i am working for this week used to have an old mojo, and it seems the old cables will work with the new mojo as well...

we will see when the deck gets here

Re: Mojo DX deck control issue

Todd Sanderson — Fri, 12 Jun 2009 21:22:49 GMT

I should say... try it!

If it works then whoo hooo!!!

Re: Mojo DX deck control issue

Todd Sanderson — Fri, 12 Jun 2009 21:22:07 GMT

But you need 422 for the deck.

Re: Mojo DX deck control issue

chrisfoley — Fri, 12 Jun 2009 21:19:30 GMT

we have a cable here from the old system that is a rosetta stone model usb/4. it also says vtr 422 on it. it is usb on one end and serial on the other

i am guessing this is the adapter and cable rolled into one?

Re: Mojo DX deck control issue

chrisfoley — Fri, 12 Jun 2009 21:00:01 GMT

thanx so much for the quick reply...

Re: Mojo DX deck control issue

Todd Sanderson — Fri, 12 Jun 2009 20:37:35 GMT

You'll want to use RS-422 deck control. This is connected to the Mac via the USB port using a Keyspan serial to USB adapter.

So you'll need:

1-a RS422 to serial cable

2-a Keyspan adapter (this adapts the serial signal to USB)

Once connected you'll configure the deck in the Avid software using the Deck Configuration setting.

Mojo DX deck control issue

chrisfoley — Fri, 12 Jun 2009 20:13:47 GMT

I am working on a new Mojo DX on a Mac. We are doing an HD project that was supposed to be all tapeless, but for one of the shoots, they shot on HDCAM tapes...

The serial port which would normally control the deck is useless on the Mojo DX. Apparently, they just put it there for "manufacturing purposes." (see page 20 "using the Avid Mojo DX)

We are renting an HDCAM deck to digitize the footage tonight. How am I going to get control of the deck thru the Avid? Do I hook up the SDI for the footage and the firewire for deck control?

Any help would be appreciated.