Film and 24p

Re: 16mm Keycode error

ritam_bhatta — Mon, 06 Jul 2009 17:07:07 GMT

1. checking project window, format it is 16mm film.

2. But i didnt find the KN Film Column, (There is KN START/END column only.)

plz guide me.

thankx.

Re: 16mm Keycode error

MichaelP — Fri, 03 Jul 2009 19:38:50 GMT

Check two more things:

1. Project window, format. Make sure it says 16mm film

2, Bring up the KN Film column - make sure it says "16.1"

If those aay 35mm then that would explaing why it may be counting as 35mm and not 16mm.

Michael

Re: 16mm Keycode error

ritam_bhatta — Fri, 03 Jul 2009 19:07:35 GMT

no avid meta data in not matching wiht the moniter burn in & aloso not with the the punchlist. frame counter is +19 -> +00. not +15 -> +00.

Re: 16mm Keycode error

MichaelP — Wed, 01 Jul 2009 19:13:32 GMT

So now I m trying to figure out why the Avid metadata in the bin and above the monitor matches the burn-in exactly, which is what you want, but does not match the punch lists...

Also, you mention that it is a "+" and not an "&". Can you tell me what the burn-in code is rolling over for the frame counter? Is it +19 -> +00 or is it +15 -> +00?

Michael

Re: 16mm Keycode error

ritam_bhatta — Wed, 01 Jul 2009 15:41:09 GMT

yes keycode value is perfect match with burncode (moniter value) & separator between feet and frames show up as an "+" not "&".

Re: 16mm Keycode error

MichaelP — Tue, 30 Jun 2009 12:02:46 GMT

You shot 16mm and are in a 16mm project, and you are saying that the footage counter is wrong? How does it vary by? The punch list is counting in 20 frames per KeyKode correct and not 40 frames per foot as you would find on a film synchronizer.

When you enter a value, does the separator between feet and frames show up as an "&" to denote 16mm? Also, is there a burn-in? Does the KeyKode value above the monitor match the burn-in?

Michael

16mm Keycode error

ritam_bhatta — Tue, 30 Jun 2009 04:32:16 GMT

plz help me i am using avid xpress pro hd 5.7 on an IBM platform my problem is that i started a 16mm film project and capture my telecine material but when i entering the keycode number starting keycode number is perfectly ok with the punch list (recived from lab along with telecine) but in end keycode its vary.

Incase of 35mm project it works perfectly allright no problem.

please help me.