Hi Everybody,
I'm getting the following error in the console.
"Hardware detected a host vsync error"
Does anyone know what this might be?I'm running an Adrenaline with an HP 8200 MC2.7.5 XPMy picture is stuttering and tearing. This happens at random.I tested the Adrenaline on another system and it works fine. I testedthe problem system with different projects on the Editshare and itshows the same problem.Does anybody have any ideas?Thanks for your help.Eric
Hi Bauhaus,
Is de Adrenaline box connected to the onboard Firewire or to a PCI firewire card.
greetz,
Ruurd.
Hallo Ruurd,
I'm using the internal firewire on the HP xw8200. It has been working fine until now.
Bedankt,
Eric
I,ve had the same problem but in an Unity fibre channel environment (whit LP and EX Media array's) with diverent hp's. only the wx8200 has this problem. Avid suggested to connect the BOB to the internal FW and check the
Avid® Adrenaline™ Configuration Guidelines for the HP® xw8200 Workstation
. When I'll find out more about it or hear anything from Avid I'll let you know.
For now you can try to work standalone, I found out when I consolidated a sequence to a local drive I was able to write it back to tape without any problems.
Greetz
Check to see if the Ref light is lit on the front of the DNA box. If it is not and you syncing the DNA box with a black burst source, make sure you set the genlock to reference and notthe default Internal
HTH
Thanks for the important information.
- The ref light on my DNA-box is not lit.
- I connected the refs of DNA and recorder to a G2-Evolution.
- What do you mean by 'genlock'? Where can I set the genlock to reference? The setting Audio Project - Hardware - Sync mode - Internal cannot be changed.
AGB,
The Netherlands
Go to your video output tool and you'll see a button for sync lock - choose reference and your DNA will lock to an external genlock reference signal.
Larry Rubin
Senior Editor
The Pentagon Channel
www.pentagonchannel.mil
Hi Larry,
Thanks a lot. Wow, the ref-light is burning! Never seen that.
Have a nice day!
Allard Bon,
You're welcome, Allard. Glad that worked out for you.
Avid Technology, Inc. brands: Digidesign | M-Audio | Sibelius | Pinnacle Systems
© Copyright 2000-2008 Avid Technology, Inc. All Rights Reserved — Legal Notices | Terms of Use | Privacy Policy | RSS Feeds | Site Map